 |  | 
 The product designs with LCD to show ATX power voltage. Easy to plug with ATX power 20/24-pin and plug in (P4/P6/P8) to show the voltage on the LCD panel.
Easy to check ATX power supply
Aluminum case
Accurate voltage indicator +/- 0.1V (+12V1/+5V/+3.3V/5VSB/+12V2/-12V)
ATX P.G. value display
Lower or higher P.G. values alarm
ATX output connectors check
Lower voltage detected alarm
Over voltage alarm
No voltage detected alarm
Manual
Plug-in your ATX power 24/20-pin and plug-in (P4/P6/P8) into the tester
Turn on your ATX power supply
LCD shows each voltage and P.G. value on the screen automatically and you can hear 2 beep sounds
ATX power output connector checking one by one. If power output is working, the LED will light on; If power output failed, the LED will not light on
Plug-in (HDD/Floppy) connector and check LED light (+12V1/+5V)
Plug-in SATA connector and check LED light (+12V1/+5V+3.3V)
Remove the connector after your checking
Do not plug-in 2 connectors into the tester at the same time (Not include 24 pin connector)
Abnormal voltage detected will not display on the screen
No voltage detect, "LL" will display on the screen
When detected Voltage is lower than Min. Value, "LL" will display on the screen
When detected Voltage is higher than Max. Value, "HH" will display on the screen
When detected voltage is lower than table value, will alarm
When detected voltage is higher than table value, will alarm
P.G. value detected lower than 100ms or higher than 900ms, P.G. value is abnormal and alarm
When abnormal happened, it will alarm and relative digit blink on the screen
Each Voltage Normal Range
+5V, +3.3V, +5VSB: ±5%
+12V1, +12V2, -12V: ±10%
|
Secure On-Line Ordering Site
Tel: (888) 860-4416 Fax: (732) 416-8788
sales@pctekonline.com
Business hours are from 10:30am to 7:00pm EST Monday to Friday
3 Kellogg Court Suite 11 Edison NJ 08817
Copyright (C) 1997-2011, PCTekOnline.com All rights reserved.
Thank you for shopping at PCTekOnline.com ! |
|